| |
 |
Engine Accessories
15 Gallon Gas Tank with or without Intank Fuel Pump |
Carry that extra 5 gallons of gas where it belongs!
8 Years ago we embarked on a process of building the only larger fuel tank for the Samurai. Over 15 months of labor went into making our first tanks. They have been great sellers over the years. But when the mold finally committed moldacide it was time to take a hard look at the project and update it.
Our New improved tank now has baffles in it to prevent the pickup tube from starving for fuel when your gas level is low on inclines. The best part of the new tank is our adaptation of a modified Sidekick/Tracker in tank electric fuel pump.
Our 15 Gallon tank gives you 50% more fuel capacity. This tank is made from DOT approved Polyethylene. It will never rust or rot out. The 3/16” thick steel skid plate is Zinc plated and affords far better protection than the stock plate. Each tank includes a new sending unit and everything you will need for the installation.
The tanks can be purchased with the in tank fuel pump, we can modify your pump and install it in the tank. Installation will take about 1-2 hours and there no special tools needed.
The in tank fuel pump model uses a stock Suzuki In Tank fuel pump from a Sidekick, Tracker, or 1990s Samurai. You must use a High Pressure Fuel Filter unit (included), banjo bolts and banjo fittings to connect to the filter inlet and outlet.
The tanks are available in black and “natural” colors. The natural is slightly opaque so that the fuel level is visible when you look at it. This can be very comforting when you are trying to decide whether or not you have enough gas to do just one more section of trail or if there is any doubt as to the accuracy of the fuel gage. Some used old style tanks may be available from time to time. Call to inquire.
| SKU: |
15 Gallon Tank Standard Configuration CHS-7500 |
| Price: |
$395.00 |
| Shipping Weight: |
50 lbs. |
| SKU: |
15 Gallon Tank with In Tank Fuel Pump CHS-7510 |
| Price: |
$495.00 |
| Shipping Weight: |
50 lbs. |
| |
Taking Orders Now |
|
The Full Circle 1600 Install Kit (8 valve and 16 valve!) |
 |
Our Full Circle Engine Adaptor for installing 1.6L Sidekick or Geo tracker engines into Samurais are by far the best available. We may not have come up with the idea of putting a 1.6 motor into a Samurai, but we have perfected the process beyond all others. Designed with our Polyurathane Bushings to prevent the engine from sagging in the mounts. The full circle design of our adaptor plate provides strength and alignment that is not available in any other adapter. Alignment bushings provided with the kit position the adapter plate and transmission perfectly. There is no need to raise the body to fit our kit.
| SKU: |
Type: |
Price: |
|
| ENG-0050 |
Adaptor 1.6 Engine to Samurai Transmission |
$125.00 |
Call for Availability or application assistance! |
| ENG-0055 |
Engine mounts only |
$149.95 |
Call for Availability or application assistance! |
| ENG-0059 |
Transmission mount/Spacer |
$29.95 |
Call for Availability or application assistance! |
| ENG-0060 |
Complete Adaptor kit 1.6 to Samurai |
$259.00 |
| Online Store |
|
105 Amp Alternator Kit |
 |
Our kit supplies the higher current needed for accessories like winches and auxiliary lighting. We use a quality Delco-Remy alternator the same found on late-model GM trucks. No mods to your wiring are necessary. Includes bracket, vbelt, pigtail cable, bolts, Allen key and high-current charging wire. *Specify if you have a 1600 (G16a/b) motor
| SKU: |
ENG-3000 1.3 motor |
| Price: |
$249.95 |
| Shipping Weight: |
15 lbs. |
| |
Call for Application Assistance |
| SKU: |
ENG-3001 1.6 8V 16V motor |
| Price: |
$249.95 |
| Shipping Weight: |
15 lbs. |
| |
Call for Application Assistance |
|
|
|
|